Pleasure 2

Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is: Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In lime-rich areas it is recommended that you regularly remove limescale from the shower head and shower nozzle by hand. Rub your hand over the shower head and/or shower nozzle until the limescale has gone. Avoid using a sponge/cloth or detergents that have an abrasive effect.

Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.
• In lime-rich areas it is recommended that you regularly remove limescale from the shower head and shower nozzle by hand. Rub your hand over the shower head and/or shower nozzle until the limescale has gone. Avoid using a sponge/cloth or detergents that have an abrasive effect.

Rust, Scrap, Coal
• In lime-rich areas it is recommended that you regularly remove limescale from the shower head and shower nozzle by hand. Rub your hand over the shower head and/or shower nozzle until the limescale has gone. Avoid using a sponge/cloth or detergents that have an abrasive effect.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.