Skip to content

Accent 90

SKU: Accent90 Categories: ,
Dimensions N/A
Hole diameter

35 mm

Rotation

0°, 110° och 360°

Color

, , , ,

Installation advice

• Recommended hole in the countertop: 80 mm from the wall/splashback to the center of the hole.

• Recommended hole in the countertop: 80 mm from the wall/splashback to the center of the hole.

• Recommended hole in the countertop: 80 mm from the wall/splashback to the center of the hole.

• Recommended hole in the countertop: 80 mm from the wall/splashback to the center of the hole.

• Recommended hole in the countertop: 80 mm from the wall/splashback to the center of the hole.

Product data sheet
Product data sheet 30170 Accent 90 Original.pdf
Product data sheet 30176 Accent 90 Sand.pdf
Product data sheet 30177 Accent 90 Amber.pdf
Product data sheet 30178 Accent 90 Shadow.pdf
Product data sheet 30179 Accent 90 Classic.pdf

Exploded drawing
Accent 90 exploded drawing.pdf

Manual
Manual Kitchen Mixers.pdf

Maintenance tips

Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.

Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.

Rust, Scrap, Coal
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.

You may also like…