Technical data
Hole diameter: 35 mm
Maintenance tips
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is: Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.
Installation advice
• The mixer is normally placed behind or to the side of the basin. Before installation check which mixer location suits the intended look of your bathroom. It is important that the distance between the mixer and the basin is correct. We recommend that the water flows in as close to the centre of the basin as possible.
Bath > Basin mixer
