Technical data
Hole diameter: 35 mm
Rotation 360° or 0°
Maintenance tips
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.
Installation advice
• Recommended hole size in worktop: 80 mm from wall/splashback to centre of hole. For positioning closer to wall, a short handle is available as an accessory.
