Technical data
Hole diameter spout: 35 mm
Hole diameter handle: 35 mm
Recommended CC between spout and handle: 100-300 mm
Rotation 0°, 110° or 360°
Water connection: G3/8”
Cold-Start function
Maintenance tips
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is: Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.
Installation advice
• Recommended distance between spout and handle: 100-300 mm
