| Dimensions | N/A |
|---|---|
| Color | Original, Sand, Amber, Shadow, Classic, Black, Rust, Scrap, Coal |
| CC | 190 mm |
| Fits | Geberit Duofix Sigma H112 WC frame |
| Flush | 6/3 litre flush |
- Teknisk data Tekniske dataTekniske data Technische Daten Technische gegevens Technical data Technical data Tekniset tiedot
- Asennussuositus
- Installasjonsråd
- Installation advice
- Installation advice
- Installationsempfehlung
- Installationsråd
- Monteringsråd
- 3D
- Dokument DokumentDokument Dokumentieren Document Document Document Asiakirja
- Maintenance tips
- Maintenance tips
- Pflegehinweise
- Tips vor onderhoud
- Underhåll
- Vedligeholdelse
- Vedlikeholdstips
- Ylläpitovinkkejä
- Architect
- Architect
- Architekt
- Arkitekt
- Arkitekt
- Arkitekt
- arkkitehti
Installation advice
Product data sheet Style Amber 15062.pdf
Product data sheet Style Classic 15069.pdf
Product data sheet Style Coal 15066.pdf
Product data sheet Style Original 15060.pdf
Product data sheet Style Rust 15064.pdf
Product data sheet Style Sand 15061.pdf
Product data sheet Style Scrap 15065.pdf
Product data sheet Style Shadow 15063.pdf
Manual Flush Plate Scandtap.pdf
Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.
Rust, Scrap, Coal
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.
