Name: Harmonized short pipe
SKU: Harmonizedshortpipe
Availability: InStock

Harmonized short pipe

Color	Original, Sand, Amber, Shadow, Classic, Black, Rust, Scrap, Coal
Length	85 mm (the ceiling shower bracket’s ultimate length depends on the thickness of the plasterboard and/or other ceiling materials)

Installation advice

• Before installation, it is recommended to check what height the ceiling shower head should be installed at to provide an optimal shower experience• See our recommended installation kit LK Harmonized Installation Kit This product requires two installation kits.• Use a pipe-in-pipe system for installation, see installation instructions for dimensions

Product data sheet Harmonized short pipe Amber 21127.pdf
Product data sheet Harmonized short pipe Classic 21129.pdf
Product data sheet Harmonized short pipe Coal 21123.pdf
Product data sheet Harmonized short pipe Original 21120.pdf
Product data sheet Harmonized short pipe Rust 21121.pdf
Product data sheet Harmonized short pipe Sand 21126.pdf
Product data sheet Harmonized short pipe Scrap 21122.pdf
Product data sheet Harmonized short pipe Shadow 21128.pdf

Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.

Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.

Rust, Scrap, Coal
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.