Skip to content

Harmonized mixer body and peripherals

SKU: Harmonizedmixerbodyandperipherals Categories: , ,
Color

, , , , , , , ,

Installation advice

• Before installation, it is recommended to check what height the ceiling shower head should be installed at to provide an optimal shower experience

• See our recommended installation kit LK Harmonized Installation Kit. This product requires three installation kits.

• Use a pipe-in-pipe system for installation, see installation instructions for dimensions

Product data sheet Harmonized mixer body and peripherals Amber 21157.pdf
Product data sheet Harmonized mixer body and peripherals Classic 21159.pdf
Product data sheet Harmonized mixer body and peripherals Coal 21153.pdf
Product data sheet Harmonized mixer body and peripherals Original 21150.pdf
Product data sheet Harmonized mixer body and peripherals Rust 21151.pdf
Product data sheet Harmonized mixer body and peripherals Sand 21156.pdf
Product data sheet Harmonized mixer body and peripherals Scrap 21152.pdf
Product data sheet Harmonized mixer body and peripherals Shadow 21158.pdf
Harmonized mixer body and peripherals exploded drawing.pdf

Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.

Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.

Rust, Scrap, Coal
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.

You may also like…