Vector

Color

Height

Standard
Medium
High

SKU: Vector Categories: Basin mixer, Bath

Dimensions	N/A
Color	Original, Sand, Amber, Shadow, Classic, Black, Rust, Scrap, Coal
Height	Standard, Medium, High
Hole diameter	35 mm

Installation advice

Product data sheet Vector
Product data sheet Vector Original 10230.pdf
Product data sheet Vector Sand 10236.pdf
Product data sheet Vector Amber 10237.pdf
Product data sheet Vector Shadow 10238.pdf
Product data sheet Vector Classic 10239.pdf
Product data sheet Vector Black 10338.pdf
Product data sheet Vector Rust 12230.pdf
Product data sheet Vector Scrap 12231.pdf
Product data sheet Vector Coal 12232.pdf

Product data sheet Vector Medium
Product data sheet Vector Medium Original 10250.pdf
Product data sheet Vector Medium Sand 10256.pdf
Product data sheet Steel Vector Medium Amber Art no 10257.pdf
Product data sheet Vector Medium Shadow 10258.pdf
Product data sheet Vector Medium Classic 10259.pdf
Product data sheet Vector Medium Black 10358.pdf
Product data sheet Vector Medium Rust 12250.pdf
Product data sheet Vector Medium Scrap 12251.pdf
Product data sheet Vector Medium Coal 12252.pdf

Product data sheet Vector High
Product data sheet Vector High Original 10240.pdf
Product data sheet Vector High Sand 10246.pdf
Product data sheet Vector High Amber 10247.pdf
Product data sheet Vector High Shadow 10248.pdf
Product data sheet Vector High Classic 10249.pdf
Product data sheet Vector Black High 10348.pdf
Product data sheet Vector High Rust 12240.pdf
Product data sheet Vector High Scrap 12241.pdf
Product data sheet Vector High Coal 12242.pdf

Exploded drawing
Vector exploded drawing.pdf
Vector Medium exploded drawing.pdf
Vector High exploded drawing.pdf

Manual
Manual Basin Mixers.pdf

Maintenance tips

Original, Sand, Amber, Shadow
• Treatment with a stainless steel polish is recommended after installation to prevent marking with fingerprints, lime , grease and other contaminants. This should be done every three months. The brand we recommend is Würth.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.

Classic, Black
• Avoid cleaning with materials or detergents that have an abrasive effect.
• Clean the product with a little soap and a damp microfibre cloth, rinse with clean water and then dry with a dry microfibre cloth.
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.

Rust, Scrap, Coal
• In areas with lime-rich water it is recommended that you regularly remove lime deposits from the nozzle with a finger. For thorough lime removal: Remove the nozzle and place it in a solution of 3 parts warm water and 1 part vinegar (max. 12%) for 10 minutes to 2 hours (depending on extent of lime deposit). Then rinse in clean water and refit the nozzle to the mixer. See exploded drawing for location of nozzle.
• Avoid cleaning with materials or detergents that have an abrasive effect.
• The surface of products in the by Scandtap-series has been developed to be ultra matte. By polishing the material with Stainless Steel Care Spray, the properties of the PVD-colours are enhanced. Stains such as limescale are also prevented from sticking to the material. We recommend this treatment at least every three months. If you wish to preserve the industrial feel, no treatment is necessary.